Pipes And Tubes

MASCO are one of the well known manufacturers, suppliers, importers, exporters and traders of Carbon Steel Pipe.

Carbon Steel Seamless Pipe/Tube

MASCO are one of the well known manufacturers, suppliers, importers, exporters and traders of Carbon Steel Pipe for high-temperature service. Carbon steel pipes are suitable for welding, bending, flanging, and similar forming operations. Mechanical testing of the specimens shall include tensile, bending, flattening, hydrostatic and nondestructive electric tests. Specimens undergoing bending tests shall consist of sections cut from a pipe. For flattening tests, the specimens shall be smooth on the ends and burr-free, except when made on crop ends. All tests shall be performed in room temperature. If any test specimen shows flaws Carbon Steel Pipe can be discarded and substituted for another test specimen. Before testing, if a specimen has scribe scratches, a retest shall be allowed. A retest shall also be allowed if a specimen breaks in an inside or outside surface flaw.

ASME SA53 Carbon Steel Pipe API 5l Carbon Steel Pipe ASTM A106 Seamless Pressure Pipe

Carbon Steel Welded Pipe/Tube

MASCO is a specialist in manufacturing welded pipes & tubes. With its enviable manufacturing infrastructure, vast experience and depth in understanding of the subject, its capabilities match with the best in business, globally. When tubes are made on fully automatic tube mills, the product is bright annealed, subjected to NDT, size checked, polished if required and stencil marked on line itself.

These products can be supplied in the following grades:

Austenitic Grades:	TP304, 304L, 316, 316L, 316Ti, 317L, 321, 321H, 347, 347H.
Ferritic Grades:	TP409,410, 430Ti, 436, 439M, 441, 444
Duplex:	UNS 31803, UNS 32205, UNS 32304, LDX2101

Alloy Steel Pipe/Tube

Alloy Steel Seamless Pipes specification covers nominal wall and minimum wall seamless ferritic alloy-steel pipe intended for high temperature service. Alloy Steel Seamless Pipes ordered to this specification shall be suitable for bending, flanging (vanstoning), and similar forming operations, and for fusion welding ASTM A335 GR P5 | GR P9 | GR P11 | GR P22 | GR P91.

Copper Pipes& Tubes

Cupro Nickel Tubes are widely used in condensers, coolers and heat exchangers where resistance to corrosion and erosion is paramount, yet maintaining a high thermal conductivity rate. To be used preferably in marine conditions. Cupro Nickel Tubes forms a protective film which is multi-layered in flowing seawater. Resists marine bifouling.
Cupro Nickel Tubes are produced in a range of outside diameter, wall thickness various temper conditions to achieve the required mechanical properties and grain size. Cupro Nickel Tubes mechanical and dimensional characteristics of Cupro Nickel Tubes satisfy the most demanding orders that require tight tolerances.